BXTQR - COMPONENT 1, SEMI-GLOSS HIGH SOLID (SUPP DATA)

  • MSDS: BXTQR
  • Manufacturer: CARDINAL INDUSTRIAL FINISHES
  • Product Name: COMPONENT 1, SEMI-GLOSS HIGH SOLID (SUPP DATA)
  • National Stock Number: 8010-00N059672
Product Identification

Product ID:COMPONENT 1, SEMI-GLOSS HIGH SOLID (SUPP DATA)
MSDS Date:10/04/1994
FSC:8010
NIIN:00N059672
Kit Part:Y
MSDS Number: BXTQR

Responsible Party
CARDINAL INDUSTRIAL FINISHES
1329 POTRERO AVE
SO EL MONTE, CA 91733
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 818-444-9274

Preparer: BOB SYPOWICZ

Cage: 65860

Contractor
CARDINAL INDUSTRIAL FINISHES
SOUTH EL MONTE, CA 91733 US

Telephone: 818-444-9274 OR 213-283-9335

Cage: 65860

Ingredients

2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA 313) (CERCLA)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 3%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2.1 @ 20C

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 9%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM


ACETIC ACID, BUTYL ESTER; (N-BUTYL ACETATE) (CERCLA)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 10%

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


VOLATILE ORGANIC COMPOUND AS SUPPLIED PAINT

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K


VOLATILE ORGANIC COMPOUND MIXED 4 TO 1 W/340LASG CATALYST

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K


2.83 #/GAL 340

RTECS: 9999999ZZ


ISOCYANATES ARE PRESENT. SEE MDSD FOR CATALYST FOR

RTECS: 9999999ZZ


AIR MONITORING DATA, NIOSH/MSHA APPROVED AIR SUPPLIED

RTECS: 9999999ZZ


HAND CREAM. WEAR IMPERVIOUS CLOTHING AND

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:CAN CAUSE IRRITATION AND REDNESS,
TEARING OR BLURRED VISION. SKIN:MODERATE IRRITATION POSSIBLE FROM
PROLONGED EXPOSURE, DEFATTING AND DERMATITIS. INHALATION:NASAL
IRRITATION, HEADACHE, DIZZINESS, NAUSEA, WEAKNESS OR VOMITING.
LOSS OF CONSCIOUSNESS. INGESTION:GI IRRITATION, HEADACHE, DIZZ,
NAUS, WEAK/VOMIT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:WARNING. DETECTABLE AMOUNTS OF A CHEMICAL KNOWN
TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND/OR BIRTH DEFECTS OR
OTHER REPRODUCTIVE HARM MAY BE PRESENT IN THIS PRODUCT. PAINT AND
SOLVENTS HAVE BEEN LINKED TO LIVER ABNORMALITIES, KIDNEY AND LUNG
DAMAGE.
Medical Cond Aggravated by Exposure:PRE-EXISTING RESP CNDTNS, SKIN
DISORDERS, LIVER & KIDNEY DISORDERS. WHEN CATALYZED, ALLERGIC
SKIN/RESP RXN MAY OCCUR IN SOME INDIVIDUALS. RESP SENSITIVITY RSLTS
IN ASTHMA-LIKE SYMPS ON (SUPP DATA)

First Aid

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
ATTENTION IMMEDIATELY. SKIN:WASH EXPOSED AREA WITH SOAP AND WATER.
REMOVE CONTAMINATED CLOTHING. INHALATION:REMOVE TO FRESH AIR. IF
BREATHING IS DIFFICULT, ADMINISTER OXYGEN. IF BREATHING HAS
STOPPED, GIVE ARTIFICIAL RESPIRATION. GET MEDICAL ATTENTION.
INGESTION:DO NOT INDUCE VOMITING, KEEP PERSON WARM AND QUIET. GET
MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:TCC
Flash Point:24.0F,-4.4C
Lower Limits:1.1%
Upper Limits:11.4%
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CONTAINERS MAY DEFORM OR EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DECOMPOSITION PRODUCTS MAY YIELD OXIDES OF
CARBON AND NITROGEN.

Accidental Release

Spill Release Procedures:REFER TO FIRE & EXPLO, HLTH HAZ DATA,
REACTIVITY DATA, WASTE DISP, AND CTL MEASURES SECTIONS. ELIMINATE
ALL IGNITION SOURCES, ABSORB LIQUID IN ABSORBENT MATERIAL AND
PREVENT SPREADING TO GROUND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:CNTNRS OF MATL MAY BE HAZ WHEN
EMPTIED. SINCE EMPTIED CNTNRS RETAIN PROD RESIDUALS (VAP, LIQ, &/OR
SOLID), ALL HAZ PREC IN MSDS MUST BE OBSERVED.
Other Precautions:FOR INDUSTRIAL USE ONLY WITH ADEQUATE VENTILATION.
FOLLOW PRECAUTIONS OF MSDS TO PREVENT OVEREXPOSURE. PREVENT
REPEATED OR PROLONGED SKIN CONTACT.

Exposure Controls

Respiratory Protection:IF TLV OF PROD/ANY COMPONENT IS EXCEEDED,
NIOSH/MSHA JOINTLY APPRVD AIR SUPPLIED RESP IS ADVISED IN ABSENCE
OF ENVIRON CTL. OSHA REGS ALSO PERMIT OTHER NIOSH/MSHA APPRVD RESPS
UNDER SPECIFIED CNDTNS ( SEE SFTY EQUIP SUPPLIER). (SUPP DATA)
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOCAL
EXHAUST) VENTILATION TO MAINTAIN EXPOSURE BELOW TLV (S).
Protective Gloves:CHEMICAL AND SOLVENT RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:SPLASH APRON SUGGESTED FOR MIXING OPERATIONS
(CONSULT SFTY EQUIP SUPPLIER). PVNT RPTD/PRLNGD SKIN CONT W/GB
PROT(ING 9)
Work Hygienic Practices:"WASH HANDS BEFORE EATING OR USING REST ROOM,
SMOKE IN SMOKING AREAS ONLY."
Supplemental Safety and Health
MFR TRADE/PART #:POLYURETHANE, 6400-6406 SERIES. MED CNDTNS:SUBSEQUENT
EXPOS EVEN BELOW TLV. SKIN SENSITIVITY RSLTS IN ALLERGIC DERM WHICH
MAY INCLUDE RASH, ITCHING, HIVES & SWELL OF EXTREMITIES. RESP
PROT:ENGINEERING/ADMIN CTLS SHOULD BE IMPLEMENTED TO REDUCE EXPOS
WHEN COATING IS CATALYZED, LOW LEVELS OF (ING 7)

Chemical Properties

Boiling Pt:B.P. Text:>175F,>79C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.13-1.56
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:60-62

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION WITH ALKALIS AND STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME TEMPERATURES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DESTROY BY LIQUID INCINERATION IN ACCORDANCE
WITH APPLICABLE REGULATIONS. CONTAMINATED ABSORBENT SHOULD BE
INCINERATED OR SENT TO APPROVED LANDFILL IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATI ONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.